I added a 1" square tube cross member ahead of time when I built the lid so that I could mount the bike mount after painting. Here's a look under the lid where the mount bolts come through.
Thursday, May 14, 2009
Bike Rack - Rocky Mounts
I bought some locking rocky mounts and bolted them to the top of the lid near the edge. This way the rear tire will be able to be strapped to the 3/4" square tube of the rack to keep it from bouncing around on the trail. You just take your front tire off and put the fork on the mount and tighten it down.
I added a 1" square tube cross member ahead of time when I built the lid so that I could mount the bike mount after painting. Here's a look under the lid where the mount bolts come through.
I added a 1" square tube cross member ahead of time when I built the lid so that I could mount the bike mount after painting. Here's a look under the lid where the mount bolts come through.
Subscribe to:
Post Comments (Atom)
1 comments:
This post is very helpful. You can see my website Austrailers, Manufacturers of different types of Trailers, Box Trailers and Tandem Trailers, Car Trailers, Builders Trailers, Off Road Trailers in Campbelltown, Moorebank, Clontarf, Australia
Post a Comment